Product Overview
Fits ALL 2013-2017 Honda Accord Coupe V6 Models.
Give your 2013-2017 Honda Accord Coupe V6 a louder, more aggressive voice with this T-304 Stainless Steel Muffler Delete Axle Back Exhaust. It replaces the factory rear mufflers with 2.5-inch straight piping that splits to a dual rear exit, finished with a 4-inch slant-cut double wall chrome tip on each side.
T-304 Stainless Steel Construction: Built from T-304 stainless steel for strong resistance to rust and corrosion, with a polished finish on the piping.
2-Piece Design: The system comes in two pieces: a Y-pipe section with the flange inlet and one tip, and a second tip section that slips into the Y-pipe and is secured with the included clamp, for easier handling and fitment.
Direct Bolt-On Fitment: Bolts to the factory exhaust flange, and the hanger rods slot into the factory rubber hangers, so no cutting or welding is required.
Dual 4-Inch Slant-Cut Tips: Double wall 4-inch chrome tips with a slant-cut outlet fill the factory exhaust cutouts for a clean, aggressive rear-end look.
Specifications:
Type: Muffler Delete Axle Back
Material: T-304 Stainless Steel
Surface Finish: Chrome Tip
Manufacturer Warranty: 90 Days
Country of Origin: United States
Exit Type: Dual Split Rear Exit
Tip Wall Type: Double Wall Tip
Tip Shape: Slant Cut
Tip Diameter: 4 Inches
Pipe Diameter: 2.5 Inches
Number of Pieces: 2
Package Includes:
1 x T-304 Stainless Steel Muffler Delete Axle Back Exhaust ( 2 Pieces ) with Dual 4" Chrome Tips
1 x Bag of Hardware
Key Features
- 2013-2017 Honda Accord Coupe V6 Fitment: Fits 2013-2017 Honda Accord Coupe models with the 3.5L V6.
- Muffler Delete Axle Back Design: Replaces the factory rear mufflers with straight 2.5-inch piping for a louder, more aggressive exhaust note.
- T-304 Stainless Steel Construction: Built from T-304 stainless steel for strong resistance to rust and corrosion.
- 2-Piece Design: Y-pipe section with one tip plus a second tip section, joined with the included clamp.
- Dual Split Rear Exit: One tip on each side, filling the factory exhaust cutouts.
- 4-Inch Slant-Cut Double Wall Tips: Double wall tips with a slant-cut outlet for a clean, finished look.
- Chrome Tip Finish: Bright chrome tips that stand out under the rear bumper.
- Improved Exhaust Flow: Removing the factory mufflers helps improve exhaust flow and cut weight at the rear of the car.
- Direct Bolt-On Installation: Bolts to the factory flange and uses the factory rubber hangers, with no cutting or welding required.
- QC Inspected: Each system is QC inspected before shipping.
Installation
Installation Manual is NOT Included.
Direct Bolt-On — No Cutting or Welding Required
Professional Installation is Highly Recommended. Safely raise and support the vehicle, unbolt the factory rear mufflers from the exhaust flange and release them from the rubber hangers, fit the Y-pipe section into the factory hangers and bolt it to the factory flange, slide the second tip section into the Y-pipe and secure it with the included clamp, then align the tips and tighten all hardware.
Hardware: Mounting Hardware and Clamp are Included.
Vehicle Compatibility
| Year | Make | Model | Trim |
|---|---|---|---|
| 2013 | Honda | Accord Coupe V6 | EX / EX-L / Touring (V6) |
| 2014 | Honda | Accord Coupe V6 | EX / EX-L / Touring (V6) |
| 2015 | Honda | Accord Coupe V6 | EX / EX-L / Touring (V6) |
| 2016 | Honda | Accord Coupe V6 | EX / EX-L / Touring (V6) |
| 2017 | Honda | Accord Coupe V6 | EX / EX-L / Touring (V6) |
Vehicle fitment
1 vehicle| Years | Make | Model | Generation | Trim | Body |
|---|---|---|---|---|---|
| 2013–2017 | Honda | Accord Coupe | — | EX / EX-L / Touring (V6) | Coupe |
Important: Fits 2013-2017 Accord Coupe models with the 3.5L V6 only.
Fitment is verified against the manufacturer application data for this part. If your vehicle is not listed, or you are unsure, email support@extremeonlinestore.com before ordering.