Product Overview
Take your overlanding capability, rooftop gear capacity, and trail aesthetics to the next level with this Extreme Off-Road Package Full-Length Roof Rack and Side Access Ladder Combo Set. Specially engineered for 2018-Present Jeep Wrangler JL 4-door models, this heavy-duty cargo platform and side climber setup transforms your vehicle's roofline into a high-capacity utility station.
Industrial-Grade Carbon Steel Construction: Fabricated from thick-wall carbon steel tubing and heavy-gauge plate steel. Both the 7-rail full-length platform rack and side access ladder are built to deliver high structural rigidity and load-bearing performance under severe off-road conditions and heavy overlanding gear.
Multi-Stage Powder Coat Shield & Aerodynamic Profiling: Protected by a multi-stage coating process featuring an electrostatic primer layer beneath a micro-textured black powder coat. This rugged finish shields against trail scrapes, rock chips, rust, and UV fading while providing non-slip traction on the ladder steps. The sculpted front air deflector and contoured side rails minimize highway wind resistance and whistling.
Seven Precision-Slotted Cross Rails & Side Ladder Access: Features seven strategically placed crossbars with integrated mounting slots for securing rooftop tents, recovery boards, fuel cans, kayaks, and cargo boxes. The included ergonomic 3-rung side ladder mounts securely between the platform rack rail and lower body anchor channel for effortless rooftop accessibility.
Direct Bolt-On Installation: Scanned directly from OEM Wrangler JL CAD coordinates for an exact perimeter fit. Mounts securely into factory roof anchor channels using included brackets and hardware—no drilling, cutting, or permanent modifications required.
Key Features
-
2018-Up Jeep Wrangler JL Fitment: Engineered specifically for all 2018-Present Jeep Wrangler JL 4-Door models.
-
Complete Platform & Ladder Kit: Includes the full-length top roof rack platform carrier and matching side access ladder assembly.
-
Industrial-Grade Carbon Steel Build: Constructed from high-strength carbon steel tubing and plate steel for maximum load capacity.
-
Seven Precision-Slotted Cross Rails: Features 7 slotted crossbars providing versatile tie-down positions for overlanding equipment.
-
Textured Black Powder-Coated Finish: Multi-stage powder coat finish guards against rust, UV degradation, trail scratches, and weather.
-
Tactical Ergonomic Side Ladder: 3-rung side access climber allows fast, secure access to rooftop tents and elevated cargo.
-
Integrated Aerodynamic Wind Fairing: Sculpted front air deflector and rail contours reduce drag and minimize highway wind noise.
-
Protective Rubber Body Pads: High-density rubber/foam isolation pads cushion lower ladder brackets to prevent body paint chafing.
-
Direct Bolt-On Installation: Mounts securely to factory roof anchor points and rack channels without drilling, cutting, or welding.
-
Complete Mounting Hardware Setup: Supplied complete with heavy-duty brackets, zinc-plated/stainless fasteners, nutserts, and foam pads.
Installation
This Extreme Off-Road Full-Length Roof Rack and Side Access Ladder Combo is designed for a direct bolt-on assembly on compatible 2018-Present Jeep Wrangler JL 4-Door models.
Begin by assembling the main roof rack frame and seven slotted cross rails according to the included installation manual. Do not fully tighten every fastener until the complete rack has been aligned.
Position the rack mounting brackets at the designated factory roof anchor channels / mounting locations. Install the supplied hardware loosely first so the platform can be centered and checked for proper alignment.
Once the platform is positioned correctly, tighten the roof rack mounting hardware evenly and securely.
Install the side access ladder by aligning its upper mounting bracket with the designated rack rail / mounting channel. Position the lower ladder mount against the specified vehicle mounting location using the supplied protective rubber or foam isolation pad.
Install the supplied bolts, washers, nutserts, and related hardware, then confirm that the ladder sits securely against the intended mounting locations without unnecessary contact with surrounding body panels.
Once the rack and ladder are properly aligned, tighten all mounting hardware evenly.
After installation, verify that the complete assembly is secure before placing cargo on the rack. Recheck mounting hardware periodically, particularly after off-road driving or transporting heavy equipment.
Installation manual is included.
Professional installation is recommended.
Vehicle Compatibility
| Year | Make | Model | Trim |
|---|---|---|---|
| 2018 | Jeep | Wrangler JL | 4-Door Models |
| 2019 | Jeep | Wrangler JL | 4-Door Models |
| 2020 | Jeep | Wrangler JL | 4-Door Models |
| 2021 | Jeep | Wrangler JL | 4-Door Models |
| 2022 | Jeep | Wrangler JL | 4-Door Models |
| 2023 | Jeep | Wrangler JL | 4-Door Models |
| 2024 | Jeep | Wrangler JL | 4-Door Models |
| 2025 | Jeep | Wrangler JL | 4-Door Models |
| 2026 | Jeep | Wrangler JL | 4-Door Models |