Douglas T.
Well I have not got the diffuser on my car yet . The enclosed hardware is not the correct size. Support has
been less than helpful . I have got replies like" there is no hardware included with these parts"
not at all what the instructions say! "Go to a hardware store and find what you need " well this
is not rocket medicine there are youtube clips showing the process if you tear up the mounting holes with non conforming screws where does that leave you ? Then there is " get a professional installation " . again not a hard job if you have the correct parts to work with . I have been working with cars etc for a long time this is crazy apparently the support crew has never seen any of their products or do not give a flip ! I must say one fellow has tried by sending me some hardware however it to was too small but he was wiser than his coworkers and did try to help . I have sent a number of emails with pictures and explanations of the problem but to no avail so far !
Some way in the last several weeks I was able to install a splitter and side skirts on my car which should have made this job easy by comparison . Needless to say I am not a very happy customer
at this time while I wait for some solution . D. Taylor
Brian M.
Not to bad to install, I think they look great. Quality is good and they came quick.
Tramel L.
Great edition to the platform highly recommended.
christopher B.
Quick delivery... DIY easy install.. came with all the equipment that was needed.
Patrick C.
A little tricky to install but I think they look good
Heinz D.
The installation can be done at home with minimal tools. That said, the screws at the top of the bumper are a ginormous pain in the rear. Packaging on point, delivery, FedEx is trash...but not the the shippers fault. Not sure what happened but mine were labeled L and R ( assumed L meant driver side and R for Passenger side. Sorely mistaken, sides were swapped on my kit left was right side and right was left side. Otherwise good quality.
#10769 f.
I really like your products but I don't like the ordering process by putting my biological on your site it screwed up my security on my phone and I can't place a order by phone??? So if I can't order with out the bull I'll go else whare I like your product's so please come up with a better way.
William Bozarth B.
They look very nice they were a little rough to put on The left-hand side was rough very close to get your hand in small area
Ben S.
Easy installation, quality product!
jack l.
great product great template
Louis C.
Great quality product
jay J.
Everything worked nicely.
Patrick T.
They fit good and matches the carbon flash paint!
Steve G.
Definitely love the subtle yet more aggressive look these give. For how inexpensive these were (especially being already painted), I won’t lie, I was a tad skeptical of how well they’d actually fit.
Install wasn’t that difficult, though it helped that my friend/mechanic has a lift at his house which made things much easier. Templates were pretty straight forward but wouldn’t lay perfectly flat. The only adjustments we ended up needing were elongating the holes on both inside fins, as one was about 1/8” lower and the other was about 1/8” higher (could have been from us trying to smooth out the template). This DEFINITELY made having a lift and power tools even more convenient.
For the price, these definitely cannot be beat. And they aren’t as bulky, expensive, or “obvious add-on” as the full diffuser fin pieces.
Peter B.
The installation went very well thanks to the Corvette Channel on YouTube. There is confusion at least to me as to right and left. Right has always been the passenger side of the vehicle but that is not the case with this installation. Yes, I installed them wrong the first time so I installed them twice. Should have it explained a little better. The diffusers look good and enhance the rear look of the car.
Jro b.
Not a bad install; however, templates aren’t marked so had to place on bottom of bumper to make sense of it along with the diffusers.
Take your time on the left side with the hydraulic lines being there but other than that it went well. Just under 2hrs.
Received product quickly too.
B. K. H.
Easy install and exceptional fit as always with EOS products
Bill K.
Arrived quickly and well packaged. Paint was a perfect match for carbon flash.
The templates are set up well. Good mod…. You will think they should have been molded in by GM.
Jeron W.
The accessory I ordered and received for my C7 Corvette is perfect. The packaging for shipping was perfect and I received it before the end of the week. I will continue to order accessories from this company. 5 Stars
Nathan R.
Quick and easy ordering process, quality product, easy installation, looks great.
Christopher J.
Ordering and delivery were top notch. Finish is very good, fitment is good.
Randy P.
Looks great happy with the Product installation was fairly easy and quick
Timothy B.
Nothing but positive...great fit
Justin V.
Everything fit great. Shipping was fast even during the holidays.
Michael M.
Got these for my 16 Z06 Z07 and they complete the look of the rear fascia of the car!! Fast shipping, packed excellent and all hardware included! Fit is good for aftermarket parts and the paint is perfect!! Better than expected for less than $100!!
Jacy J.
These are a "must have" IMHO...otherwise the rear of the C7 looks like the tailgate of a pickup. Instructions are clear, templates are nice and these fit perfect but installation is tough due to the tight spacing within the rear bumper. I did this mod a few years ago on my first C7 so was dreading doing it again. A lift my help for the awkward angles your arms have to conform to. Start with the hardest (top) nut on each one and work your way down so the others aren't in your way. A ratcheting wrench is a must have as a socket will not fit up in the top of the bumper. These look like a factory part once installed which is why I like them over some of the other more expensive options out there.
Craig S.
Customer service is horrible
David S.
Very happy with the diffusers!
Michael M.
Great product, excellent template makes for easy install at a fraction of the cost of competitors
Mike R.
The fit was spot on.A little rough putting them on but that’s ok because after they were installed I forgot about my hands being cut and sore from the tight places you have to work with
Bill S.
received very quick excellent part
Dean B.
High quality parts easy to install
Frank C.
Very happy with the outcome!
Bryan B.
There’s the slightest gap between the rear diffuser and the fin
Gmarg
Comes with template which makes install a breeze
Don G.
Look great and an awesome complement to your rear end.
jeffrey t.
Good experience with this company on many purchases. People are fair, prices are good and sevice is always as promised
Muhammad A.
Looks GREAT!!!!!
Luis A.
The installation instructions where simple and helpful, all for a fraction of the cost of other similar product from other vendors.
Brian G.
Perfect fit! Love it
Lawrence H.
Fast delivery. Explicit instructions.
Kevin B.
Great product and a easy installation with very good instructions
Pedro M.
Looks good but the screws were too small. I had to go to the hardware store to get the correct screws.
Kevin O.
very quick postage, nicely presented product
Stephen K
RIght and left marked wrong
Install was not too bad. Did the right side 1st and did not like the fit or the look, they were angled as opposed to straight in the pics. Almost took them back off but I had holes now. When I picked up the left ones and tried to fit them on the right. Much better. So I took them back off again an d switched sides. Much better. Fit is pretty good, not perfect but for $100.... The look is pretty good overall. Rachet wrench is a help, beware of R and L markings on fins.
Mike O'Leary
Rear bumper diffuser fins
After watching the install video, I went for a set of these. The left side was harder to install than the right. Not a lot of room to turn the 8mm screw heads. Having a ratchet box wrench was very beneficial. Too hard to get a 1/4" socket up behind the bumper. I am very happy with the look. For a $100 DIY mod, you can't go wrong.